JY7206 系列钻具螺纹润滑脂_供应产品_JY7206 系列钻具螺纹润滑脂,供应,加工/合作,项目/合作,服装项目_金鹰润滑材料（金湖）

JY7206 系列钻具螺纹润滑脂 JY7206 Grease for drilling tool thread

产品描述 Description

本产品以皂基稠化剂稠化矿物油或半合成油，并加入固体填料制成。符合API RP 7A1及SY-T5198-1996标准。

This product is made by thickening mineral oil or semi-synthetic oil with soap-based thickener and adding solid fillers. Comply with API RP 7A1 and SY-T5198-1996 standards.

性能特点 Performance characteristics

良好的耐高温、抗磨、极压、抗介质、防粘扣和密封性能。

Good high temperature resistance, anti-wear, extreme pressure, medium resistance, anti-sticking and sealing properties.

典型数据 Typical data

分析项目 Item	质量指标 Quality Index		试验方法 Test method
分析项目 Item	A	B	试验方法 Test method
外观 Appearance	灰绿色均匀油膏 Gray green uniform ointment		目测 Visual inspection
锥入度,0.1mm Cone penetration, 0.1mm	290~350		GB/T269
蒸发度(150℃,1h),(m/m) 不低于 Evaporation degree (150℃, 1h), (m/m) ≥	4.0	10.0	GB/T0337
腐蚀（45^#钢,100℃,3h） Corrosion (45# steel, 100℃, 3h)	合格		SH/T0331
水沥滤（65℃，2h）/% Water leaching (65℃, 2h)/%	≤5
涂刷性能 Painting performance	不低于-20℃（普通）、不低于-40（高寒） ≥-20℃(normal), ≥-40(high cold)
相似粘度(10S^-1),Pa.S 不大于 Similar viscosity (10S-1), Pa.S ≤	1000(-10℃)	2200(-30℃)	SH/T 0048

应用推荐 Application

适用于油气田和地质勘探钻井用的钻铤和钻杆组合件螺纹的密封和润滑。在高温、高负荷、大扭矩应力条件下，能防止泥浆泄漏，避免螺纹擦伤和粘扣，拆卸清洗方便。A型适用于-20～200℃，B型适用于-40～200℃。

It is suitable for sealing and lubrication of drill collars and drill pipe assembly threads used in oil and gas fields and geological exploration drilling. Under the conditions of high temperature, high load and large torque stress, it can prevent mud leakage, avoid thread scratches and sticking, and is easy to disassemble and clean. Type A is suitable for -20~200℃, and type B is suitable for -40~200℃.

包装形式 Packing

20L塑料桶或按用户要求包装

20L plastic barrel or packaged according to user requirements

注意事项 Precautions

涂敷前应将螺纹接头部位用煤油或其它溶剂清洗干净，并晾干或吹干；

Before coating, the threaded joints should be cleaned with kerosene or other solvents and dried or blown dry.

JY7206 系列钻具螺纹润滑脂

企业名片

买家正在看