PV016R1K1T1NMMC

PV + high pressure heavy duty piston pump | pv016r1k1t1nmmc

Working at pressures up to 350 bar (5000 psi) and speeds up to 3000 rpm, PV + is a rugged design that provides reliable loops for more demanding applications. The displacement ranges from 16 to 360 CCM / rev.

View series page

Share / email

Printing

Technical specifications:

DISPLACEMENT：016 - 16 [cm ³/ rev] maximum, frame size 1

ROTATION：R - Clockwise

VARIATION：1 - Standard

MOUNTING INTERFACE / SHAFT：K - metric 4bolt-mount; metric keyed shaft

PORTS / THREADS：1 - BSPP ports; Metric Threads

THRUDRIVE PAD AND COUPLING：T1 - Single pump prepared for thru drive, no coupling

SEALS：N - NBR seals / FKM shaftseal

ConTROLS GROUP：Hydromechanical controls

COMPENSATOR PART1：M - hydromechanical controls

COMPENSATOR PART2：M - Pressure compensator

COMPENSATOR PART3：C - Standard with integrated pmax. Pilot

WEIGHT：19 - [kg]

Body material: Cast Iron

Drainage option: Yes

Including supply pump: no

Circuit path: normally open

Configuration: single / Series / multiple

Control method: pressure | remote pressure | load sensitive | electronic control | unloading | proportional pressure

Energy recovery capacity: no

Including filter: no

Use with fluid type: standard hydraulic oil

Maximum displacement: 360 cm3 / rev, 22 inch3 / rev

Maximum flow rate: 166 Gal / min, 630 L / min

Maximum fluid temperature: 115 ° C, 239 ° F

Minimum fluid temperature: - 40 ° C, -40 ° F

Maximum noise level: 96 DBA

Maximum operating pressure: 420 bar, 6000 PSI

Radial load capacity: Consult Parker, consult Parker lb

Maximum operating speed: 3000 rpm

Maximum kinematic viscosity: 3880 sus

Minimum kinematic viscosity: 80 sus

Weight: 186 kg (max), 410 lb (max)

Medium: Hydraulic / liquid

Installation scheme: SAE | ISO | BSPP

Port connection: SAE | ISO | BSPP

Port type: flange | straight thread

Port location: side port

Pump type: plunger, variable / fixed

Rotation direction: clockwise / counterclockwise / bidirectional rotation

Sensor type: pressure | displacement

Shaft type: SAE | ISO | BSPP

Direct drive capability: Yes